Comments on: Porting Android to Beagle Board

By: dthomas

dthomas — Fri, 02 Jul 2010 17:58:38 +0000

hello ,
I have started working on beagle board recently . I have done the whole android kernel build as mentioned in above link. but when i try to connect the beagle board with my LCD montior using HDMI to DVI cable, the screen goes blank . I checked both monitor and cable by conencting HDMI port of my laptop with LCD screen. I could see the laptop screen coming over LCD as well .
So I know that this is a very basic issue but any support is welcome .
thanx

By: Android Shogun

Android Shogun — Sat, 26 Jun 2010 20:29:16 +0000

Sorry I don’t know… search on ebay…

By: Kniffuddimb

Kniffuddimb — Mon, 21 Jun 2010 20:40:52 +0000

halo,

can anyone tell me how much will an unlocked iPhone 4 16gb cost in UK?

By: Android Shogun

Android Shogun — Thu, 13 May 2010 17:29:47 +0000

i haven’t touched beagle board for a long time, sorry can’t help out here.

By: anushanker

anushanker — Fri, 07 May 2010 06:27:09 +0000

hi,
I have just ported android cupcake on beagle board rev c3. I am getting the screen with some alarming messages. but my problem is that the beagle board is not detecting the keyboard neither directly nor through USB hub. so I am not able to give any input. key board is not even getting power in both cases. mouse is getting power but its not working. keyboard is working fine with other systems.
so please tell me what is problem with my setup.
I have installed this using help from
http://free-electrons.com/blog/android-beagle/

Thanks in advance.

By: Android Shogun

Android Shogun — Sat, 19 Dec 2009 21:38:31 +0000

for now the beagle board android version supports sdk 1.5 only. you cannot run 1.6 code base on it.

By: pawan p

pawan p — Wed, 16 Dec 2009 05:54:48 +0000

hiiiiiiii,
i had created a application by using andoid sdk 1.6 means but that is not running in beagle board ,but when i chenge the sdk version to 3 the application is running successfully on beagle board can any one tell how we can run our android application on beagle board which is created on android 1.6

By: Android Shogun

Android Shogun — Sun, 09 Aug 2009 02:27:25 +0000

wow! congratulations! ^_^ hope to see your blog/tutorial about this, if possible…

By: Suresh

Suresh — Sun, 19 Jul 2009 08:33:49 +0000

Hi Shogun,

I got SD card detected, camera working fine with greenish dots in picture captured.

By: Suresh Kalidasan

Suresh Kalidasan — Sat, 20 Jun 2009 04:07:29 +0000

Hi Shogun,

I tried mounting SD card and it mounted properly commands as shown below

1. mount -o rw -t ext3 /dev/block/sdc2 sdcard
2. setprop EXTERNAL_STORAGE_STATE mounted
3. am broadcast -a android.intent.action.MEDIA_MOUNTED –ez read-only false -d file:///sdcard

now i see in Android Settings -> SD card & phone storage -> SD card is displaying
Total space = 77MB
Available space = 56MB
Unmount SD card (Highlighted)
Format SD card (Not Highlighted)

Still when i try calling Camera application in Android, i’m getting message like “Please insert an SD card before using the camera”.

Can somebody update with your comments to solve this.